Posts Tagged ‘Carburetor’

The Potential of Water Fuel Cars Can Save

December 25th, 2009

A number of pressing issues are driving Americans to look for ways to reduce their reliance on gasoline-powered vehicles. The price of gas is significantly cutting into people’s budgets. Many people no longer want to be dependent on foreign countries for oil. The pollutants that spew from our tailpipes damage the environment, and people want greener solutions. Many people want a solution, but it seems that such technology is still beyond our grasp.

It turns out, though, that there is a very old technology, almost a century old, that might hold the key to solving these problems. It reduces the amount of gasoline your car uses, can be installed for less than $1000, and the substance it runs on is readily available. Imagine cars that run on water.

Impossible, right? Well, it is true that it sounds like something out of a cheesy movie, but the technology really does exist, and is on the roads today in a variety of vehicles, including 18 wheelers. The trick is that a water fuel car isn’t actually using water for fuel, but the hydrogen in the water.

Hydrogen is an excellent fuel that has been designated as a “clean-burning fuel” by the FDA. By passing a mild current through water, using electricity supplied by the vehicle’s battery, the hydrogen and oxygen are separated and form into a gas, called Brown’s gas.

The Brown’s gas is then used to supplement the car’s gasoline fuel source. The hydrogen-oxygen gas is fed into the carburetor or manifold. The water fuel car gets better gas mileage because it is burning less gasoline. One tank of gas can last 50% longer, and even 100% longer than it would in a car running on gasoline alone.

The reduction in gasoline consumption also helps the environment. Brown’s gas burns clean, leaving behind only water and oxygen. This dilutes the cars usual emissions, reducing the output of pollutants.

Such a system is not hard to install. If you are nervous about doing it yourself, a local mechanic or friend who is familiar with cars can help. It is possible to buy fully assembled, fully installed systems, but these systems will cost 3 times as much or more as a do-it-yourself job.

This innovation is ingenious yet simple, and promises to save you money, increase American independence, and help the environment. What more could we ask for? Change your life, change the world, and at an affordable price.

Fuel Saver Magnetic Faq’s

December 19th, 2009

 1. How does Fuel Saver Magnetic works?
 
When fuel flows through the Fuel Saver Magnetic, it magnetizes fuel molecules and puts the molecules temporarily into cationic state. Fuel burning in this state is far more efficient and reduces carbon monoxide emission.
 
2. Does Fuel Saver Magnetic really work?
 
Yes! All the cars we have tested show significant fuel economy improvements. On top of that, we also receive many living proofs from our customers on how effective Fuel Saver has been in saving them plenty of money. We are very confident that you will also benefit from this little magical wonder. For that, we are offering the product risk-free to you . Read more about our Money Back Guarantee for Fuel Saver Magnetic .
 
3. Will Fuel Saver Magnetic void my car warranty?
 
Not at all as it does not require any mechanical, chemical nor electrical modifications or cuttings.
 
4. Can Fuel Saver Magnetic be installed on metal fuel pipeline?
 
Yes, the Fuel Saver can be installed on a rubber, metal, or metal braided fuel line. The performance does not vary from one type of fuel line to another.
 
5. How soon can I see the performance improvement of Fuel Saver Magnetic?
 
Immediately on your first full tank. And the improvement increases even more after a “driving-in” period (typically between 500km – 2,000km).
 
6. Will Fuel Saver Magnetic work on carburetor or fuel injection vehicles?
 
Works for both.
 
7. Will Fuel Saver Magnetic work for diesel, petrol, LPG or CNG?
 
Works for all. This is because (Fuel Saver Magnetic)the technology fundamentally works on all liquid or gases forms.
 
8. How can I install Fuel Saver Magnetic by myself?
 
Locate the petrol filter and fasten Fuel Saver Magnetic on the petrol pipeline coming out of the fuel tank or fuel filter. Place it as close as possible to the carburetor or fuel injection rail.
 
9. Will Fuel Saver Magnetic work on old or new cars?
 
Works for both.
Older cars would see greater fuel efficiency increased after run Fuel Saver Magnetic sometime (after 2500KM), this is because rust and dirt may have deposited, after 2500KM, the Fuel Saver Magnetic will clean the rust and dirt. For fast clean up the rust and dirt, use only one botol of our AutoMax NanoTech Fuel Enhancer.
New cars will enjoy continuous optimum fuel economy and have the engine and catalytic converters cleaned and protected.
 
 
10. I have seen other Fuel Saver Magnetic , how is Fuel Saver different from them?
 
Our Fuel SaverMagnetic is made of advance-precision-doped technology that produces high quality, high intensity and extremely directional magnetic flux to instantaneously:
- break down the complex fuel molecules
- rearrange the entangled fuel molecules
- ionize the molecules into cationic polarity
- Inhibit molecules from clustering
Our Fuel Saver Magnetic design is special as it delivers a better shielding for the magnetic field and echoes maximum magnetic effect towards the fuel line where it is needed. Other magnetic fuel savers mainly failed due to some reasons such as fuel line had to be cut in some cases; No real savings on diesel or gasoline fuel; Different models for different engine sizes & etc.
 
 
11. Why are you selling at such cheap price?
 
With the high fuel price, we believe with our best quality product(Fuel Saver Magnetic) and affordable price, it will benefit everybody. Lots of people thinks that, low price low quality, that is not true, to prove it to our customers, we are giving life time warranty for our product whereas others are only giving few years warranty.
Other Fuel Savers Magnetic are selling above RM150 or RM200++(USD60), we do not want to sell at higher price which the lower income group cannot afford to own it. We also do not make higher profit for our product but we want to sell more units. We give the best quality for the product and trying to cut some cost from the packaging box, advertisement etc. Whereas others trying to give you beautiful and quality packaging box, spend a lot of advertisement and sell you at higher price. Which want you want to choose?
http://fuel-savermagnetic. blogspot. com/

Pop Quiz: What Does H2O, Fuel And Your Car Have In Common?

December 17th, 2009

What every car, truck, or SUV owner needs is a way to enjoy the automobile they own and find a way to reduce costs at the same time. So let’s look at a proven way we can drive our cars and trucks and lower our fuel costs.
When it come to your car, truck or SUV what does water and fuel have in common? Well they both are contained in the same glass, at the same time and you can use them to run your automobile and increase your car’s MPG literally within minutes.
What am I talking about? H2O being converted into HHO which is Hydrogen Gas a very potent fuel that we are just now taking advantage of to use in our automobiles to save money and the environment. No matter what type of car, truck or SUV you own you can reduce your fuel costs by converting your auto into a Hydrogen Hybrid
By having your automobile converted into a Hydrogen Hybrid that uses both Gasoline or Diesel combined with Hydrogen Gas can increase your MPG by as much as 50%
Let me explain how this water into Hydrogen Technology works: I’m going to explain this exactly as I’ve read it and understand it:
First, forget the notion of damaging your car’s engine because you don’t change your engine or computer. A quart-size container is placed somewhere under the hood. You fill it with distilled water and a little bit of baking soda. The device gets a vacuum and 12 Volts of electricity from the engine when you start up your car, and it then starts to produces HHO Gas.
This Hydrogen Gas is a potent fuel that when add to your fuel supply will increase your automobiles MPG. The HHO gas is supplied to the engine’s intake manifold or carburetor and it only takes several minutes to connect it all. . . That’s it! That’s it plain and simple.
Its affordable to convert your automobile into a basic hybrid car and then expand on your Hydrogen out put in monetary increments that meet your budget. Don’t ignore this technology because right now your car or truck is being damaged by unburned fuel if you acknowledge it or not.
Don’t ignore this technology because the environment is being devastated by this unburned fuel as we speak. And I for one would like to leave this world for my children in better shape than I found it.
Understand that here is a viable technology that offers a cost effective, immediate solution to the “energy crisis” and pollution crisis – and its available right now. This is something you can do because it has a very small startup cost and you can install your conversion kit in just a few minutes without any engine modifications.
Just when you were driving around complaining about the high fuel prices, you now realize that there is something you can do about it.